Honeywell Digital Camera VDC 350PIV V User Manual

2. Safety Precautions  
1. Features  
3. Handling of the Unit  
The installation should be made by qualified service  
personnel or system installers and should confirm  
to all local codes.  
(1) Never attempt to disassemble or modify the camera.  
NIGHT VISION IR DOME CAMERA  
The camera adopts advanced Digital Signal  
Processor(DSP) technology,Enhances picture  
quality greatly to horizontal resolution of  
(2) If an abnormality should occur, immediately turn off  
the power and consult your dealer.  
1.Power supply  
(1) use with a 12VDC regulated power supply  
(2) To prevent fire or electrical shock, UL listed class  
2 wiring should be used for the 12VDC input terminal.  
(3) Be used to connect each lead to the appropriate  
terminal. Wrong connection may cause malfunction  
and/or damage to the video camera.  
540TVL. Provides clearer and more vivid image.  
Latest DSP controls for BLC, white balance,  
and gain control.  
4. Parts Description  
Dome cover (transparent)  
Camera body  
Integrated efficient powerful IR LED array can  
capture high-resolution picture even in complete  
darkness. Night view distance up to10~15m.  
Mounting Holes  
2.Operating and storage locations  
IR-LED  
Wire hole  
(1).Do not attempt to point the camera at the sun or  
other extremely bright objects that cause smear to  
appear no matter the camera is power on or not.  
It leads to damage of the CCD(Charge Coupled  
Device).  
Light control design. Auto light detection for IR  
LED switch control.  
Body cover  
Camera base  
The camera is equipped with a Vari-focal lens,  
f=4~9mm.  
Front View  
(2).When camera is installed next to equipment,  
such as wireless communication device, it emits a  
strong electromagnetic field, some irregularity such  
as noise on the monitor screen may happen.  
(3).Be sure to use a ceiling board having enough  
strength to support this camera.  
BOTTOM View  
VDC-350PIV-V  
VDC-350NIV-V  
Manual pan /tilt mechanism,3-Axis Rotation.  
Accept 12VDC power supply.  
5. Cover Removal and Attachment  
User Guide  
To remove the body cover and camera body,  
disassemble it with the L WRENCH provided in your  
ACCESSORY set. (Rotating clockwise will close it  
and rotating anti-clockwise will release it.)  
(4).Assemble the camera's main parts and lens  
quickly in a sanitary place.  
Anda polygon dome shield, which can bear up to  
120 pounds impact and won't be destroyed. It  
has excellent sealing performance and can also  
be installed by outdoor .  
(5).Do not pull the cable, it may cause disconnection.  
(6).Do not touch the inside of camera even if  
something is wrong.  
Acecessories  
(7).Before installation, make sure to disconnect the  
power supply first, check the ground connection,  
and then install it.  
Polygon material made dome shield possesses  
high light permeate rate, strong shock resistance  
capability. The whole Aluminum base can stand  
lasting shock and high temperature.  
(8).Operating temperature range:-10~+50,(14°F~122°F);  
Storage temperature range:-20~+60,(-4°F~140°F).  
(9). Be sure to use proper screws which cameras can  
be beared on the material firmly.  
3. L WRENCH  
1. PLASTIC  
ANCHOR  
2. ASSY SCREW  
TAPPING  
NIGHT VISION IR DOME CAMERA  
NIGHT VISION IR DOME CAMERA  
NIGHT VISION IR DOME CAMERA  
1
2
3
1.PLASTIC ANCHOR: insert into the SCREW hole of the  
installation location(to strengthen the installation).  
2.ASSY SCREW TAPPINGuse for installation on the  
ceiling or wall.  
4. Adjusting the Camera Direction  
On: 1~3Lux; Off: 5~6Lux  
1.0Vp-p, 75Omh, Sync Negative Polarity  
DC12V Regulated  
IR LED Drive  
Video output  
Power Input  
Camera body moves in three ways: pan, tilt and rotate.  
Adjust the direction so that the lens is pointing at the  
target.  
7. Self-Check Points  
Before Consulting After-Sales Services  
Power Consumption  
Operating Temperature  
Body  
150mA(IR LED OFF)+150mA(IR LED ON)  
-10℃ ~ +50, RH90% MAX (non-condensing)  
Aluminum  
3. L WRENCHfor body cover and camera base  
assembly.  
5. Use the lever to adjust the view angle and focus.  
CHECKING POINTS  
CONDITIONS  
Screen  
not turned on  
*Make sure whether power is connected correctly.  
*Check if the cable is connected correctly.  
Rotate 180°  
Tilt 90°  
1000g  
Weight  
6. Installation  
*If dust is seen through the monitor screen after  
fixing lens, dissemble the lens and clear off the  
dust on the surface of CCD withblower or soft cloth.  
Screen not clear  
or is spread  
Pan360°  
View angle  
All data and specifications subject to change  
without notice.  
1.Drill a hole in the place where the camera is  
installed. Completely insert the PLASTIC ANCHOR  
provided. then lead the power and video cables pass  
through the hole.  
2.Disassemble the body cover and camera base  
from dome camera .  
3.Fasten the dome camera base on the wall or the  
ceiling.  
adjustment lever  
Focus  
adjustment lever  
9. Type Number Overview  
8. Specifications  
Model(12VDC)  
Signal system  
VDC-350NIV-V  
NTSC  
VDC-350PIV-V  
PAL  
Model  
VDC-350PIV-V  
1/3'' SUPER HAD II CCD  
PAL  
VDC-350NIV-V  
6. Turn the dome cover to adjust until the lens point at  
the window, screw tightly and complete the installation.  
Image Sensor  
Signal System  
Effective Pixels  
Resolution  
NTSC  
Wall  
Ceiling  
752(H)x582(V)  
768(H)x494(V)  
Close  
10. Dimension Outline  
540TV Lines(Color), 600TV Lines(B/W)  
Minimum Illumination  
Shutter Speed  
S/N Ratio  
0.1Lux/F1.2(IR LED OFF), 0Lux (IR LED On)  
1/50-1/100,000SEC  
More Than 50dB  
Automatic  
1/60-1/100,000SEC  
White Balance  
AGC/BLC  
Automatic  
7. Connecting Low Voltage Power & Video Signal  
The wiring harness have a BNC connector to accept  
video signal ,the other connectors to accept the low  
voltage power. For mounting directly to a wall or ceiling,  
run power and video lines to the target location.  
0.45  
Gamma Correction  
Sync Model  
Lens  
INT  
Varifocal lens, f=4-9mm  
146mm  
IR LED  
Wave Length 850nm, x 21pcs IR LED  
10~15m  
IR Beam Distance  
VIDEO  
12VDC  
NIGHT VISION IR DOME CAMERA  
NIGHT VISION IR DOME CAMERA  
NIGHT VISION IR DOME CAMERA  
NIGHT VISION IR DOME CAMERA  
6
4
7
5
 

Graco Gas Grill 3A1214B User Manual
Haier Refrigerator HYC 68 68A User Manual
Hamilton Watch Watch ETA 251272 User Manual
HannsG Computer Monitor HG 171DPB User Manual
HANNspree Flat Panel Television K229 10U1 001 User Manual
Hario Glass Home Theater Server BGSN 350U User Manual
Hotpoint Washer Dryer HF8B User Manual
Hypertec Mouse KYB500 K104MUSBBLKHY User Manual
Ice O Matic Ice Maker EF 800 User Manual
iHome Laptop Docking Station ip15 User Manual