Hotpoint Video Game Controller CIB6441 CE User Manual

Instructions for  
Installation and Use  
HOB  
CIB 644 C E  
CIB 64 C. S  
CIB644.1 CE  
CIB 644 B E  
WARNING!  
GB  
WARNING: The appliance and its  
accessible parts become hot during use.  
Care should be taken to avoid touching  
heating elements.  
Children less than 8 years of age shall  
be kept away unless continuously  
supervised.  
This appliance can be used by children  
agedfrom8yearsandaboveandpersons  
with reduced physical, sensory or mental  
capabilities or lack of experience and  
knowledge if they have been given  
supervision or instruction concerning  
use of the appliance in a safe way  
and understand the hazards involved.  
Children shall not play with the appliance.  
Cleaning and user maintenance shall not  
be made by children without supervision.  
WARNING: Unattended cooking on a  
hob with fat or oil can be dangerous and  
may result in fire.  
NEVER try to extinguish a fire with  
water, but switch off the appliance and  
then cover flame e.g. with a lid or a fire  
blanket.  
WARNING: Danger of fire: do not store  
items on the cooking surfaces.  
WARNING: If the surface in glass-ceramic  
is cracked, switch off the appliance to  
avoid the possibility of electric shock.  
Never use steam cleaners or pressure  
cleaners on the appliance.  
English  
GB  
Operating Instructions  
HOB  
Contents  
Operating Instructions,1  
WARNING,2  
Description of the appliance-Control Panel,3  
Installation,3  
The appliance is not intended to be  
operated by means of an external timer  
or separate remote control system.  
Do not place metal objects (knives,  
spoons, pan lids, etc.) on the hob as they  
may become hot.  
Start-up and use,5  
Precautions and tips,10  
Care and maintenance,11  
Technical description of the models,11  
After use, switch off the hob element by  
its control and do not rely on the pan  
detector.  
our  
ate y  
08448 24 24 24  
Please phone us on  
guarantee  
to activ  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
1
 
Installation of the safety washer  
CABINET DIMENSIONS  
GB  
60  
1
2
560  
490  
3
Min. 30/Max.50  
SAFETY DISTANCES WITH FURNITURE  
Min 5mm  
Min 20mm  
30mm  
4
Min 5mm  
30mm  
Min 20mm  
5
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
3
 
Fix the hob as follows:  
GB  
1. Use short flat-bottomed screws to fix the 4 alignment  
springs in the holes provided at the central point of each  
side of the hob.  
Start-up and use  
2. Place the hob in the cavity, make sure it is in a central  
position and push down on the whole perimeter until the  
hob is stuck to the supporting surface.  
Before connecting the appliance to the power supply, make  
sure that:  
• The appliance is earthed and the plug is compliant with  
the law.  
! The screws for the alignment springs must remain  
accessible.  
! In order to adhere to safety standards, the appliance  
must not come into contact with electrical parts once it  
has been installed.  
• The socket can withstand the maximum power of the  
appliance, which is indicated on the data plate located  
on the appliance itself.  
• The voltage falls within the range of values indicated on  
the data plate.  
! All parts which ensure the safe operation of the  
appliance must not be removable without the aid of a tool.  
• The socket is compatible with the plug of the appliance. If  
the socket is incompatible with the plug, ask an authorised  
technician to replace it. Do not use extension cords or  
multiple sockets.  
! Once the appliance has been installed, the power supply  
cable and the electrical socket must be easily accessible.  
! The cable must not be bent or compressed.  
! The cable must be checked regularly and replaced by  
authorised technicians only.  
Electrical connection  
! The electrical connection for the hob and for any built-  
in oven must be carried out separately, both for safety  
purposes and to make extracting the oven easier.  
Single-phase connection  
! The manufacturer declines any liability should these  
safety measures not be observed.  
! Do not remove or replace the power supply cable for any  
reason. Its removal or replacement will void the warranty  
and the CE marking. INDESIT does not assume liability for  
accidents or damage arising from replacement/removal  
of the original power supply cable. Replacement can only  
be accepted when carried out by personnel authorised  
by INDESIT and using an original spare part.  
The hob is equipped with a pre-connected electricity supply  
cable, which is designed for single-phase connection.  
Connect the wires in accordance with the instructions given  
in the following table and diagrams:  
! The glue applied on the gaskets leaves traces of grease  
on the glass. Before using the appliance, we recommend  
you remove these with a special non-abrasive cleaning  
product. During the first few hours of use there may be a  
smell of rubber which will disappear very quickly.  
! A few seconds after the hob is connected to the electricity  
supply, a buzzer will sound. The hob may now be switched  
on.  
Other types of connection  
Types of noise during normal hob operation:  
• Buzz: due to the vibration of the metallic parts that  
make up the induction element and the pot; it is  
generated by the electromagnetic field required for  
heating and increases as the power of the induction  
element increases.  
• Soft whistle: heard when the pot placed on the heating  
zone is empty; the noise disappears once food or water  
is placed into the pot.  
• Crackle: produced by the vibration of materials on the  
bottom of the pot due to the flow of parasitic currents  
caused by electromagnetic fields (induction); can be  
more or less intense depending on the material making  
up the bottom of the pot, and decreases as the pot  
dimensions increase.  
If the mains supply corresponds with one of the following:  
Voltage and mains frequency  
• 400V - 2+N ~ 50/60 Hz  
• 220-240V 3 ~ 50/60 Hz  
Separate the wires and connect them in accordance with  
the instructions given in the following table and diagrams:  
Connecting the electricity supply cable to the mains  
If the appliance is being connected directly to the electricity  
mains an omnipolar switch must be installed with a minimum  
opening of 3 mm between contacts.  
! The installer must ensure that the correct electrical  
connection has been made and that it is fully compliant  
with safety regulations.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
4
 
• Loud whistle: heard when two induction elements of  
the same group function simultaneously at maximum  
power and/or when the booster function is set on  
the larger element while the other is auto-adjusted.  
Noise is reduced by decreasing the power level of the  
auto-adjusted induction element; pot bottom layers  
made of different kinds of materials are among the  
main causes of this noise.  
To switch the hob on, press and hold the  
approximately one second.  
button for  
GB  
The cooktop is switched On when a beep sound is  
emmited and all the cooking zones displays show  
the digit point.  
When the cooktop is OFF, after 5 sec the control  
.
switches off the KEYLOCK LED to reduce the power  
consumption.  
As soon as we touch a key, the KEYLOCK LED goes  
ON and we can continue to use the cooktop, unlocking  
the keyboard.  
• Fan noise: afan is necessary to ensure the hob functions  
correctly and to safeguard the electronic unit from  
possible overheating. The fan functions at maximum  
power when the large induction element is at maximum  
power or when the booster function is on; in all other  
cases, it works at average power depending on the  
temperature detected. Furthermore, the fan may continue  
to work even after switching the hob off, if the temperature  
detected is high.  
The types of noise listed above are due to induction  
technology and are not necessarily operational faults.  
! If the (-) or (+)button is pressed for an extended period  
of time, the display scrolls quickly though the power  
levels and timer minutes.  
Switching off the cooktop is signalled by 3 beep sound  
Setting the Power Management  
The cooktop maximum power limit is 7200W. This power  
limit can be reduced by the user to 2800W, 3500W or  
6000W.  
The sequence to set a new Cooktop Power Limit is:  
·During the first 30 seconds after plugging the applian-  
ce  
·The Touch has to be unlocked and all Heaters Off  
·Press at the same time Heater 1 and Heater 3 selection  
keys  
·Once this is done, a beep sounds and the actual Co-  
oktop Power Limit will be shown in the heater displays.  
For selecting a new Power Limit:  
Initial Light Conditions  
When power is initially applied to the Cooktop, the to-  
uch control conducts a calibration process for the to-  
uch keys, which requires a low level of ambient light in  
the area of the touch keys.  
If during this calibration process excessive ambient  
lighting is detected the User Interface displays „FL”  
(Infrared Ambient Light Error) and the control cali-  
bration process is suspended. In order to rectify the  
process any lighting that could effect the calibration  
process should be switched off (e.g. halogen cooker  
hood lighting). The error will disappear when satisfac-  
tory ambient lighting is detected and the touch control  
calibration procedure will now complete satisfactorily.  
·With the (+) and (-) keys, the Power Limit is increased.  
The selectable powers are: 2800W, 3500W, 6000W or  
7200W. When the power is 7200W, if the [+] or [-] key is  
touched the power changes to 2800W.  
The sequence to finish recording the new Cooktop Po-  
wer Limit is:  
·Press at the same time Heater 1 and Heater 3 selection  
keys  
·Once this is done, new Cooktop Power Limit is recor-  
ded and there is a system reset.  
-The „FL” error can only be generated within approx 3s  
of initial power being applied to the cooktop.  
-We recommend that the user switches off all cooker  
hood lighting and lighting directed towards the cook-  
top when power is initially applied to the cooktop.  
-After the touch control has conducted its initial cali-  
bration process, (approx 3s) any cooker hood or other  
lighting can be switched on as normal and will not af-  
To finish without recording changes:  
·If during 60 seconds there is no action, changes are not  
recorded and there is a system reset.  
.
fect the operation of the touch control.  
Switching on the hob  
After connecting the hob to the electricity mains, the  
touch pannel might be automatically locked. To un-  
clock the pannel press and hold the Control Panel  
Loock button  
.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
5
 
1. Select the cooking zone using the corresponding  
selector button.  
Switching on the cooking zones  
Each cooking zone is controlled using a selector button  
GB  
2. Adjust the power level of the cooking zone.  
and a power adjustment device consisting of a  
double(-) and (+) button.  
• To begin operating a cooking zone, press the  
corresponding control button and set the desired  
power level (between 0 and 9) using the buttons (-)  
or (+)  
Press and hold the (-) button to set the power level  
immediately at “9”  
Press and hold (+) and (-) buttons simultaneously to  
return to power level “0”  
3.When required power level is selected, touching again  
the corresponding heating zone selector button, a beep  
sounds and a ‘t’ letter with dot point appears on the heater  
display.Theremainingtimewillbedisplayedintheopposite  
part of timed heater. If timed heating zone is, for example,  
in the down part, timed time will appear in up displays.  
4. Set the cooking duration using the (-) and the(+)  
buttons  
The (-) and the(+) buttons touched simultaneously result|  
in returning to the 0 value.  
If the power level is “0” press and hold the (+) button  
If the time is not selected before 10 seconds, or if the  
selected time is 0 after 10 seconds the last touch over  
the (-)or the (+) button, the timer is switched off.  
to increase the power level quickly  
The choice of a cooking zone is signalled by a beep  
sound, and then the power level is shown on the  
display  
Starting Timer countdown.  
The countdown starts when the timer visualization is  
finished touching any cooking zone key or  
automatically 10 seconds after the last touch over  
the [+] or [-] keys. A beep sounds and the heater  
display will show the power  
If the selection of a heater is not done in 10 seconds,  
the cooktop will be turned off automatically.  
level and the dot point showing that the heater is  
timed.  
Fast Boil- “Booster” function  
The booster function for some of the cooking zones may be  
used to shorten heating-up times.  
It may be activated by pressing the (+) button over level  
9. This function boosts the power to 1600 W or 2000 W,  
depending on the size of the relevant cooking zone.  
The activation of of the booster is signalled by a beep  
! To change the time for a timed heater, repeat the  
process explained above.  
!Pressing and holding the + and - keys increases the  
speed of time selection  
sound, and the letter ‘P’ appearing on the display.  
The booster works for max 10 minutes. After these 10  
minutes a beep sounds and the cooking zone will  
return to level “9”  
End of Timer countdown.  
When the remaining time has run out, the timed heater  
is switched off, the heater display shows a blinking ‘0’  
and the timer alarm beeps for one minute  
The alarm will be cancelled by pressing any key of the  
touch control.  
With the heater at Booster level, if the [+] key is  
Touched an error beep sounds and the cookset  
doesn’t change. With the heater at Booster level, if the  
[-] key is Touched a beep sounds and the cookset is  
reduced to 9.  
Control panel lock  
When the hob is switched on, it is possible to lock the oven  
controls in order to avoid accidental changes being made to  
the settings (by children, during cleaning, etc.).  
Switching off the cooking zones  
To switch off a cooking zone, select it using the corresponding  
Press the  
button to lock the control panel: -the icon  
will illuminate and an audible beep sound will be emmited.  
To use any of the controls (e.g. to stop cooking), you  
selector button  
and:  
• Press the (-) button: the power of the cooking zone will  
progressively decrease until it is switched off.  
Once the cooking zone is selected, the heater can  
also be switched off by touching the [-] and [+] keys  
simultaneously. A beep  
must switch off this function. Press the  
button for  
a few moments, the icon will stop illuminating and the  
lock function will be removed.  
sounds and the corresponding display shows “0”.  
All the keys on the cooking zone selection will be locked  
if :the cooktop is off,,  
Using the Timer  
! All the cooking zones may be programmed  
simultaneously, for a duration between 1 and 99 min.  
if the Control Panel Lock is activated or  
if an error on a cooktop occurs.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
6
 
Switching off the hob  
The “u” sign on the display appears if after  
selecting the cooking zone the pan is not placed on a  
heater , or in case of:  
GB  
Press the button  
to switch off the appliance - do not  
rely solely on the pan sensor.  
• An incompatible pan  
If the control panel lock has been activated, the controls  
will continue to be locked even after the hob is switched  
on again. In order to switch the hob on again, you must  
first remove the lock function.  
• A pan whose diameter is too small  
• The pan has been removed from the hotplate.  
After 10 sec. with no pan on the heating zone, a warning  
beep signal is emmited.  
After 60 sec. with no pan on the heating zone,, the heater  
switches off.  
Practical advice on using the appliance  
! Use cookware made from materials which are  
compatible with the induction principle (ferromagnetic  
material). We especially recommend pans made from:  
cast iron, coated steel or special stainless steel adapted  
for induction. Use a magnet to test the compatibility of  
the cookware.  
Overheating protection  
If the electronic elements overheat, the number signalizing  
the power level starts flashing, and the letter “c” appears  
on the display. When the temperature has reached a  
suitable level, this message disappears and the hob may  
be used again.  
! Do not use adapters, diffusers, or metal plates on the  
cooking zones .They may have a detrimental effect  
upon the hob’s performance, and might damage the  
hob’s aesthetics.  
Safety switch  
The appliance has a safety switch which automatically  
switches the cooking zones off after they have been in  
operation for a certain amount of time at a particular power  
level. When the safety switch has been triggered, the display  
shows “0”.  
SUITABLE  
UNSUITABLE  
For example: the right rear hotplate is set to 5 and will  
switch off after 5 hours of continuous operation, while the  
front left hotplate is set to 2 and will switch off after 8 hours.  
When one or more keys are activated for more than  
10 sec. the touch control. switches off  
*
Copper,  
Cast iron  
Enamelled steel  
Special stainless steel  
Aluminium, Glass, Earthenware,  
Ceramic, non magnetic Stainless steel  
In addition, to obtain the best results from your hob:  
• Use pans with a thick, flat base in order to fully utilise the  
cooking zone.  
A warning beep sounds is emmited every 10  
sec., while the key/s is/are activated.  
With all heaters at zero power during 10 sec. the  
Cooktop is switched off.  
If the switching off is due to an accidental activa-  
tion of keys, the touch control actuates as above.  
• Always use pans with a diameter which is large enough  
to cover the hotplate fully, in order to use all the available  
heat.  
Buzzer  
This can also indicate several irregularities:  
• An object (a pan, cutlery, etc.) has been placed on the  
control panel for more than 10 seconds.  
• Something has been spilt on the control panel.  
• A button has been pressed for too long. All of the above  
situations may cause the buzzer to sound. Remove the  
cause of the malfunction to stop the buzzer. If the cause of  
the problem is not removed, the buzzer will keep sounding  
and the hob will switch off.  
• Make sure that the base of the cookware is always clean  
and dry, in order to fully utilise and extend the life of both  
the cooking zones and the cookware.  
• Avoid using the same cookware which has been used  
on gas burners: the heat concentration on gas burners  
may distort the base of the pan, causing it not to adhere  
correctly.  
Errors and Alarms  
When an error is detected, the whole appliance or the  
heater/s are switched off, a beep sounds (only if one or  
more heaters are active) and all displays show a ‘F’  
letter and the error code (an index number or a letter)  
alternately.  
Safety devices  
Pan sensor  
Each cooking zone is equipped with a pan sensor device.  
The hotplate only emits heat when a pan with suitable  
measurements for the cooking zone is placed on it.  
If the problem does not disappear by itself, please  
contact the Technical Service.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
7
 
Power level  
Maximum operating time in hours  
GB  
1
2
3
4
5
6
7
8
9
9
8
7
6
5
4
3
2
1
Practical cooking advice  
Pressure cooking  
Pressure cooker  
Frying  
ª
Grilling  
Boiling  
Crêpes  
Cooking on a high flame and browning  
(roasts, steaks, escalopes, fish fillets,  
fried eggs)  
Fast thickening (liquid juices)  
Boiling water (pasta, rice, vegetables)  
Milk  
§
§
S
Slow thickening (dense juices)  
S
¢
Bain-marie cooking  
Pressure cooking after whistle  
¢
£
Low-flame cooking (stews)  
Reheating dishes  
¡
Chocolate sauce  
Keeping food hot  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
8
 
Precautions and tips  
! This appliance has been designed and manufactured  
in compliance with international safety standards. The  
following warnings are provided for safety reasons and  
must be read carefully.  
• Never perform any cleaning or maintenance work  
GB  
without having disconnected the appliance from the  
electricity mains.  
• The appliance should not be operated by people  
(including children) with reduced physical, sensory  
or mental capacities, by inexperienced individuals or  
by anyone who is not familiar with the product. These  
individuals should, at the very least, be supervised  
by someone who assumes responsibility for their  
safety or receive preliminary instructions relating to  
the operation of the appliance.  
This appliance conforms to the following European  
Economic Community directives:  
- 2006/95/EEC dated 12/12/06 (Low Voltage) and subsequent  
amendments;  
- 2004/108/EEC dated 15/12/04 (Electromagnetic  
Compatibility) and subsequent amendments;  
- 93/68/EEC dated 22/07/93 and subsequent amendments.  
- 1275/2008 stand-by/off mode.  
• For the attention of wearers of pacemakers or other  
active implants:  
The hob complies with all current standards on  
electromagnetic interference.  
Your induction hob is therefore perfectly in keeping  
with legal requirements (89/336/CEE directives). It  
is designed not to create interference on any other  
electrical apparatus being used on condition that  
the apparatus in question also complies with this  
legislation.  
Your induction hob generates short-range magnetic  
fields.  
To avoid any interference between your induction  
hob and a pacemaker, the latter must be designed to  
comply with relevant regulations.  
General safety  
! Make sure that the air inlet behind the fan grille is never  
obstructed. The built-in hob should, in fact, be provided  
with suitable ventilation for the cooling of the electronic  
components used in the appliance.  
! We advise against the installation of an induction hob above  
an under-the-counter refrigerator (heat) or above a washing  
machine (vibrations). In fact, there would be insufficient space  
for the ventilation of electronic components.  
In this respect, we can only guarantee our own  
product conformity. Please consult the pacemaker  
manufacturer or your doctor concerning its conformity  
or any possible incompatibility.  
• The appliance was designed for domestic use inside the  
home and is not intended for commercial or industrial use.  
• The appliance must not be installed outdoors, even in  
covered areas. It is extremely dangerous to leave the  
appliance exposed to rain and storms.  
• Do not touch the appliance when barefoot or with wet or  
damp hands and feet.  
• The appliance must be used by adults only for the  
preparation of food, in accordance with the instructions  
provided in this booklet. Do not use the hob as a worktop  
or chopping board.  
• Do not let children play with the appliance.  
• Do not place metal objects (knives, spoons, pan lids,  
etc.) on the hob as they may become hot.  
The appliance is not intended to be operated by  
means of an external timer or separate remote-  
control system.  
• The glass ceramic hob is resistant to mechanical shocks,  
but it may crack (or even break) if hit with a sharp object  
such as a tool. If this happens, disconnect the appliance  
from the electricity mains immediately and contact a  
Service Centre.  
Disposal  
• Ensure that power supply cables of other electrical  
appliances do not come into contact with the hot parts of  
the hob.  
• Remember that the cooking zones remain relatively hot for  
at least thirty minutes after they have been switched off.  
An indicator light provides a warning when residual heat  
is present (see Start-up and use).  
• Keep any object which could melt away from the hob,  
for example plastic and aluminium objects, or products  
with a high sugar content. Be especially careful when  
using plastic film and aluminium foil or packaging: if  
placed on surfaces which are still hot, they may cause  
serious damage to the hob.  
• Always make sure that pan handles are turned towards  
the centre of the hob in order to avoid accidental burns.  
• When unplugging the appliance, always pull the plug  
from the mains socket; do not pull on the cable.  
• When disposing of packaging material: observe local  
legislation so that the packaging may be reused.  
• The European Directive 2002/96/EC relating to Waste  
Electrical and Electronic Equipment (WEEE) states that  
household appliances should not be disposed of using  
the normal solid urban waste cycle. Exhausted appliances  
should be collected separately in order to optimise the cost  
of re-using and recycling the materials inside the machine,  
while preventing potential damage to the atmosphere and  
to public health. The crossed-out dustbin is marked on all  
products to remind the owner of their obligations regarding  
separated waste collection.  
For further information relating to the correct disposal of  
exhausted household appliances, owners may contact  
the public service provided or their local dealer.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
9
 
Care and maintenance  
• Once it is clean, the hob may be treated with a special  
Switching the appliance off  
Disconnect your appliance from the electricity supply  
before carrying out any work on it.  
GB  
protective maintenance product: the invisible film left  
by this product protects the surface from drips during  
cooking. This maintenance task should be carried out  
while the appliance is warm (not hot) or cold.  
Cleaning the appliance  
• Always remember to rinse the appliance well with clean  
water and dry it thoroughly: residues can become  
encrusted during subsequent cooking processes.  
! Do not use abrasive or corrosive detergents (for  
example, products in spray cans for cleaning barbecues  
and ovens), stain removers, anti-rust products, powder  
detergents or sponges with abrasive surfaces: these may  
scratch the surface beyond repair.  
Stainless steel frame (only in models with outer frame)  
Stainless steel can be marked by hard water which has  
been left on the surface for a long time, or by cleaning  
products containing phosphorus.  
! Never use steam cleaners or pressure cleaners on the  
After cleaning, it is advisable to rinse the surface well  
and dry it thoroughly. If water is spilt on the surface, dry  
it quickly and thoroughly.  
appliance.  
• It is usually sufficient simply to wash the hob using a  
damp sponge and dry it with absorbent kitchen towel.  
• If the hob is particularly dirty, rub it with a special  
glass ceramic cleaning product, then rinse well and  
dry thoroughly  
! Some hobs have an aluminium frame which is similar to  
stainless steel. Do not use any cleaning or degreasing  
products which are not suitable for use with aluminium.  
• To remove more stubborn dirt, use a suitable scraper.  
Remove spills as soon as possible, without waiting for  
the appliance to cool, to avoid residues forming crusty  
deposits. You can achieve excellent results by using  
a rust-proof steel wire sponge - specifically designed  
for glass ceramic surfaces - soaked in soapy water.  
• If any plastic or sugary substances are accidentally  
melted on the hob, remove them immediately with the  
scraper, while the surface is still hot.  
Disassembling the hob  
If it is necessary to disassemble the hob:  
1. Loosen the screws fixing the alignment springs on  
each side.  
2. Loosen the screws holding the fixing hooks in each  
corner.  
3. Take the hob out of its installation cavity.  
! Do not attempt to repair the appliance yourself. If the  
appliance breaks down, contact a Service Centre.  
Technical description of the  
models  
CIB 644 C E  
Hobs  
CIB 64 C. S  
CIB644.1 CE  
CIB 644 B E  
Cooking zone  
Back Left  
Power (W)  
I 1200 - B1600  
I 1500 - B 2000  
I 1500 - B 2000  
Back Right  
Front Left  
Front Right  
Total power  
I 1200 - B1600  
7200  
The induction system is the quickest existing way of cooking. Unlike traditional hotplates where the cooking zone heats  
up, with the induction system heat is generated directly inside pans which have ferromagnetic bases.  
Key:  
I = single induction cooking zone  
B = booster: the power level of the cooking zone may be boosted  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
10  
 
Guarantee  
GB  
12 months Parts and Labour Guarantee  
Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of  
breakdown repairs for twelve months from the date of purchase.  
This gives you the reassurance that if, within that time, your appliance is proven to be  
defective because of either workmanship or materials, we will, at our discretion, either repair  
or replace the appliance at no cost to you.  
The guarantee is subject to the following conditions:  
- The appliance has been installed and operated correctly and in accordance with our ope-  
rating and maintenance instructions.  
- The appliance is only used on the electricity or gas supply printed on the rating plate.  
- The appliance has been used for normal domestic purposes only.  
- The appliance has not been altered, serviced, maintained, dismantled or otherwise interfered  
with by any person not authorised by us.  
- Any repair work must be undertaken by us or our appointed agent.  
- Any parts removed during repair work or any appliance that is replaced become our property.  
- The appliance is used in the United Kingdom or Republic of Ireland.  
The guarantee does not cover:  
- Damage resulting from transportation, improper use, neglect or interference or as a result  
of improper installation.  
- Replacement of any consumable item or accessory. These include but are not limited to:  
plugs, cables, batteries, light bulbs, fluorescent tubes and starters, covers and filters.  
- Replacement of any removable parts made of glass or plastic.  
THE GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN  
COMMERCIAL OR NON-DOMESTIC PREMISES.  
5 Year Parts Guarantee  
Hotpoint also offers you a FREE 5 year parts guarantee. This additional guarantee is  
conditional on you registering your appliance with us and the parts being fitted by one of our  
authorised engineers. There will be a charge for our engineer’s time. To activate the extra  
parts warranty on your appliance, simply call our registration line on 08448 24 24 24 (ROI 01  
230 0800)  
Extended Guarantees  
We offer a selection of protection plans that enable you to fully cover yourself against the  
expense of repair bills for the life of your policy. To find the ideal plan for you please call our  
advice line on 08448 226 226 (ROI 01 230 0233)  
Free Helpdesk Service  
We have a dedicated team who can provide free advice and assistance with your appliance  
if you experience any technical difficulties within the first 90 days of ownership.  
Simply call our Hotpoint Service Hotline on 08448 224 224 (ROI 0818 313 413) for telephone  
assistance, or, where necessary, to arrange for an engineer to call.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
11  
 
01/2014 - 195108912.03  
XEROX FABRIANO  
GB  
After Sales Service  
No one is better placed to care for your Hotpoint appliance during the course of its working  
life than us - the manufacturer.  
Essential Contact Information  
Hotpoint Service  
We are the largest service team in the country offering you access to 400 skilled telephone  
advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local  
service.  
UK: 08448 224 224  
Republic of Ireland: 0818 313 413  
Please note: Our advisors will require the following information:  
Model number  
Serial number  
Parts & Accessories  
We supply a full range of genuine replacement parts as well as accessory products that  
protect and hygienically clean your appliance to keep it looking good and functioning  
efficiently throughout its life.  
UK: 08448 225 225  
Republic of Ireland: 0818 313 413  
Appliance Registration  
We want to give you additional benefits of Hotpoint ownership. To activate your FREE 5 year  
parts guarantee you must register your appliance with us.  
UK 08448 24 24 24  
Republic of Ireland: 01 230 0800  
As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves  
the right to use quality, recycled components to keep down customer costs and minimise  
material wastage.  
Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB  
Indesit Company, Unit 49 Airways Industrial Estate, Dublin 17  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
12  
 

Graco Outboard Motor 24G785 User Manual
Grizzly Air Compressor H8208 User Manual
Grizzly Saw G0621X User Manual
Grundig Projector CP 731i User Manual
Harbor Freight Tools Air Compressor 67697 User Manual
Harbor Freight Tools Kitchen Utensil 94559 User Manual
Hoshizaki Refrigerator HUR40a User Manual
HTC Cell Phone NIKI100 User Manual
Huffy Fitness Equipment RC2000MK2 User Manual
Husqvarna Chainsaw 1153176 95 User Manual